What is the RP-SMA reduction for?

The reduction of the rp-sma connection is used exclusively to insert the installation cable through the pipes of the wall of the electrical installation using a cable guide, without the need to weld.

How much real coverage will the equipment provide me?

In general, the team in perfect condition can provide the indicated coverage. But very rarely these conditions are achieved.

Generally, if the outdoor antenna is installed with a coverage of 70% or more, each roof antenna should cover a maximum of 500 m2. If they are panel antennas, it can reach up to 1000m2. In low frequencies (800-900mhz), in high frequencies (1800-2100mhz) the coverage is reduced considerably.

How many meters of cable can I use?

Never exceed 15 meters between antennas and equipment. There must be a minimum distance of 7 meters between antennas. Ideally, 10 meters from the outdoor antenna to the repeater and 5 meters from the equipment to each indoor antenna.

Where should I aim the antenna?

It is possible that there are location maps of your company's mobile phone antennas in your country. Otherwise, you must call your company to tell you where the nearest antenna is, its orientation and the frequency it transmits (800 MHz 4G, 900 MHz, 2G-3G, etc.).